Carbon monoxide alarm alarm CO honeycomb smoke detector manufacturer CO SMOKE


Operating voltage 4.5 (V) brand hwafarda alarm current 10 (mA)
Detection angle 360 static current 50 (uA) working temperature -10~50 (c)
Application range alarm fittings type gas alarm detector type HFD-CO01D

The power supply section 3 No. 5 working range of AA battery temperature: 4 to 38 DEG C, relative humidity: 25 ~ 85%
Monitoring current is less than 80uA (can be more than a year of work) alarm sound 85dB 1M
Alarm current <80mA quiescent current: <80uA product size diameter 100mm* high 38mm
Low voltage warning every 30 seconds a "Jack" sound, the screen shows "Lb" alarm concentration 50ppm60-90 minutes 100ppm10-40 minutes 300ppm3 minutes
The test button is pressed a few seconds to send the alarm that the standard of the alarm is normal. The standard is based on the UL2034/EN50291:
Product introduction
1 battery powered carbon monoxide alarm (commonly known as smoke alarm),
2 high volume alarm output (1 meters in front of the 85dB).
3 the use of high sensitivity, high stability, long life, zero power consumption of chemical carbon monoxide sensor, excellent anti alcohol interference performance.
4 under normal circumstances, the LED indicator lights about 40 seconds flashing a time; the alarm, the LED indicator light flashes quickly, and the alarm sound.
When the carbon monoxide concentration is reduced, it is restored to the monitoring state.
5 test function, press the test button to test the alarm function is normal, it is recommended to test once a week.
6 anti battery back protection function; low battery voltage detection function, the battery voltage is low when a prompt sound every minute, suggesting that the battery will run out of battery replacement early.
7 static monitoring of less than 80 A, a very low standby power consumption (less than 0.35 MW); alarm working current of about 50 ma.
8 optional normally open, normally closed contact output (need to customize), convenient connection control equipment.
9 installation and replacement of the battery is very convenient.
Product advantage
1 energy saving and environmental protection: five section three battery can stand for more than one year.
2 volume: 85 dB
3 low power alarm
4.LCD three digit significant concentration
test method
Alarm after electrify heating 10 minutes (the new alarm will replace the battery)
Then it can be detected by automobile tail gas or motorcycle tail gas
Note: please get the goods after loading the battery, press the middle of the test button. Generally in the air show that the normal value of 0PPM-10PPM,
The automatic alarm off screen function, the screen off after the light flashes, showed that in the running state.
Installation location
To probe installed in the ceiling of a room under 30 centimeters, or on the ceiling.
The installation position can not be too close to the gas cooker or hood. Avoid fumes directly into the alarm, otherwise it will affect the sensitivity of the alarm.
Carbon monoxide alarm.
Carbon monoxide poisoning, commonly known as gas poisoning, is our country following the city traffic accidents and the number of deaths in the third major accidents.
Carbon monoxide alarm is a kind of effective weapon to prevent carbon monoxide poisoning. The role of the carbon monoxide is that when the concentration of carbon monoxide in the air exceeds the specified standard.
Sound and light alarm, remind people to escape in time, do a good job of prevention and self rescue.
Source: carbon monoxide carbon monoxide gas can produce all the incomplete combustion of carbonaceous material. Such as coal stove fire, burning the northern winter, the use of heaters,
City gas pipeline heating furnace, incomplete combustion, the use of substandard water heater or water heater installation is not correct, the car engine idling..... Carbon monoxide alarm alarm CO honeycomb smoke detector manufacturer CO SMOKE


Operating voltage 4.5 (V) brand hwafarda alarm current 10 (mA)
Detection angle 360 static current 50 (uA) working temperature -10~50 (c)
Application range alarm fittings type gas alarm detector type HFD-CO01D

The power supply section 3 No. 5 working range of AA battery temperature: 4 to 38 DEG C, relative humidity: 25 ~ 85%
Monitoring current is less than 80uA (can be more than a year of work) alarm sound 85dB 1M
Alarm current <80mA quiescent current: <80uA product size diameter 100mm* high 38mm
Low voltage warning every 30 seconds a "Jack" sound, the screen shows "Lb" alarm concentration 50ppm60-90 minutes 100ppm10-40 minutes 300ppm3 minutes
The test button is pressed a few seconds to send the alarm that the standard of the alarm is normal. The standard is based on the UL2034/EN50291:
Product introduction
1 battery powered carbon monoxide alarm (commonly known as smoke alarm),
2 high volume alarm output (1 meters in front of the 85dB).
3 the use of high sensitivity, high stability, long life, zero power consumption of chemical carbon monoxide sensor, excellent anti alcohol interference performance.
4 under normal circumstances, the LED indicator lights about 40 seconds flashing a time; the alarm, the LED indicator light flashes quickly, and the alarm sound.
When the carbon monoxide concentration is reduced, it is restored to the monitoring state.
5 test function, press the test button to test the alarm function is normal, it is recommended to test once a week.
6 anti battery back protection function; low battery voltage detection function, the battery voltage is low when a prompt sound every minute, suggesting that the battery will run out of battery replacement early.
7 static monitoring of less than 80 A, a very low standby power consumption (less than 0.35 MW); alarm working current of about 50 ma.
8 optional normally open, normally closed contact output (need to customize), convenient connection control equipment.
9 installation and replacement of the battery is very convenient.
Product advantage
1 energy saving and environmental protection: five section three battery can stand for more than one year.
2 volume: 85 dB
3 low power alarm
4.LCD three digit significant concentration
test method
Alarm after electrify heating 10 minutes (the new alarm will replace the battery)
Then it can be detected by automobile tail gas or motorcycle tail gas
Note: please get the goods after loading the battery, press the middle of the test button. Generally in the air show that the normal value of 0PPM-10PPM,
The automatic alarm off screen function, the screen off after the light flashes, showed that in the running state.
Installation location
To probe installed in the ceiling of a room under 30 centimeters, or on the ceiling.
The installation position can not be too close to the gas cooker or hood. Avoid fumes directly into the alarm, otherwise it will affect the sensitivity of the alarm.
Carbon monoxide alarm.
Carbon monoxide poisoning, commonly known as gas poisoning, is our country following the city traffic accidents and the number of deaths in the third major accidents.
Carbon monoxide alarm is a kind of effective weapon to prevent carbon monoxide poisoning. The role of the carbon monoxide is that when the concentration of carbon monoxide in the air exceeds the specified standard.
Sound and light alarm, remind people to escape in time, do a good job of prevention and self rescue.
Source: carbon monoxide carbon monoxide gas can produce all the incomplete combustion of carbonaceous material. Such as coal stove fire, burning the northern winter, the use of heaters,
City gas pipeline heating furnace, incomplete combustion, the use of substandard water heater or water heater installation is not correct, the car engine idling.....

it  is full range of Piston Pin for the following type :

AAA) YANMAR DIESEL ENGINE     
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,     
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330 

     
BBB) DAIHATSU DIESEL ENGINE     
PS22/26/ DS18(A)/ DS(B)22/

DL20/22/28/ DK20   / DK 28 
     
CCC) NIIGATA DIESEL ENGINE     
 6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX/  31AFTE  /34AGT   
     
DDD) AKASAKA      
AH30/AH38/ AH40/D/F/  A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/  UEC37H-HB/ UEC 37/88H     
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/  UEC60LS/ UEC45HA/115 ALL UET TYPE     
     
EEE) MITSUBISHI    (KOBE AND AKASAKA ) 
45/75C/ 45/80D/ 52/90D/ 52/105D.E/

UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/      
ETC     
     
FFF) HANSHIN     
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/

6EL30/ EL(S)32     /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/     

GGG) MAN B&W     
S35MC/L35MCE/L50MCE/ L60MCE/ 40/54A     
     
HHH) MITSUBISHI PURIFIER     
SJ700~SJ1800/SJ 2000


III)SULZER 

 RND 68 RND 76 RD 44



JJJ) MAKITA

GSLH – 633 637                 KSLH -633 637



Kkk) PIELSTICK

PC 2-5  PC 2-6


Piston Pin

Piston Pin,Standard Piston Pin,Piston Pin Material,Engine Piston Pin

ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com