Seed Grain Processing Equipment
We are the specialized and top manufacturers in China and We offer full set Seed Processing Line solution. Whole Seed Cleaning Plant is from Pre-cleaning, Fine cleaning, Destining, Gravityseparating, Beans polishing,Seed coating, Last seed weighing and packing.
The Seed Cleaning & Processing Line is composed of several single machines. Base on different grain type and processing grain, we will suggest appropriate grain cleaning machines. These grain cleaning machines arecollocated freely. Between each machines, there are Bucket Elevator , Inclined Evator or other conveying equipment to link up.
Seed Cleaning & Processing Plant has followingadvantages:
Easy to setup, machines easyto move and can be placed freely.
Save labor, there are middleconveyors to transfer grain from one machine to another.
Effective and low cost, singlemachines compose a seed processing line improve the working performance. Lowproduction cost makes it hot sale.
Above flexibility andconvenience makes Seed Cleaning & Processing Plant makes it becoming hot sales item.
Seed Processing Line installationeffect and introduction.
This Grain Cleaning & Processing Plant iscomposed of 5XZC-5DX Seed Cleaner & Grader, 5XZ-5 Gravity Separator, DTY Bucket Elevator, 5BYX-5 Seed Coating Machine, and HLD-50 Bagging Scale System.
Working flow: The seeds arefed into 5XZC-5DX Seed Cleaner &grader first. Seed cleaner & grader will remove the dust, lightimpurity, oversize and undersize impurity before seed flow into 5XZ-5 gravity separator. During seeds cleaned by Gravity Separator, the seeds are separated by density difference. Thepartially eaten seeds, immature seeds, insect damaged seed, sick seeds, moldyseeds are separated from good healthy seeds. Then seeds go on being lifted by DTY Bucket Elevator, falling into the 5BYX-5 Seed Coating Machine. During the seed coating procedure, the chemical,fertilizer or other protective liquidity will be coated to seeds' surface andimprove seeds' germination rate. Finally seeds being transferred to Weighing Scale . Seeds will be weightedand packed to bags ready for sell.
Seed Grain Processing Equipment Seed Grain Processing Equipment,Beans Processing Plant,Grain Processing Plant,Sesame Proessing Plant Hebei HELIDA Grain Selecting Machinery Technology Co., Ltd. , https://www.grainseedscleaner.com
Â
Cylinder diameter
32
40
50
63
80
100
Working Medium
Air
Action type
Double acting
Proof pressure
15.3kgf/cm2(1.5Mpa)
Max.pressure
10.2kgf/cm2(1.0Mpa)
Min.pressure
0.5kgf/cm2(0.05Mpa)
Environment and fluid temp
-10~+60
Piston veocity
50~1000mm/s
Buffering
Air buffering
Stroke tolerance
~0~250+10 , 251~1000+14 , 1001~1500+18
Rc(PT)Joint size
G1/8"
G1/4"
G3/8"
G1/2"
Product Description
SC Series Pneumatic Cylinder
Product characteristics
Thin light
Under keeping operation precision and service life, its total
Lengthis 1/2-1/3 of general cylinder it presents thin and light
Characteristics.
Easy to install
Flush mounting is used, it needn't any parts, so that the space can be saved.
Easy to maintain
Because of simple assembling, it is convenient to assemble,disassemble and maintain.
Magnetic switch
There is space for assembling slot outside the body, so the
Magnetic switch is installed and adjusted easily
Why US
1: Various style for completely series pneumatic products for you to choose
2: High quality with competitive price
3: Sample order & small quantity order is ok
4: Provide free products information.
5. Reliable quality assured and active after-sell service
Payment and Shipment
Payment:Â T/T, Western Union, LC,Â
Shipment:Â Usually we send the goods by DHL, FedEx, UPS, TNT, or EMS or as your request;
                   After delivery, we will send you the tracking number by E-mail.
                   If you do not receive it within 7 business days after shipping, please contact us.
Note:2: We do our best to ship your order in 4Â weeks after receive your payment.
Other Products
  Our company also can provide other pneumatic cylinders as below,
1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISOÂ 6432)
2.Standard cylinder:SC/SU,MB,CA1Â Â
3.Mini cylinder:MA,MAL,CJ2,CM2,CJP Needle cylinder
4.Double-shaft cylinder:TN,CXS
5.Free installation cylinder:CU
6.Slide bearing cylinder:STM
7.Three-shaft cylinder:MGP
8.Stopper cylinder:RSQ
9.ADVU, SDA,CQ2B compact cylinder
10.Rotary cylinder:MSQ
11.Rodless cylinder:CY1
12.Air gripper:MHC Series Pneumatic Parrallel Gripper, MHC point type Gripper
      Parallel Style Wide Opening Air Gripper
For more details, plz feel free to ask,we will assist you to make the right things for your market!
Â
Specifications:
Â
Cylinder diameter
32
40
50
63
80
100
Working Medium
Air
Action type
Double acting
Proof pressure
15.3kgf/cm2(1.5Mpa)
Max.pressure
10.2kgf/cm2(1.0Mpa)
Min.pressure
0.5kgf/cm2(0.05Mpa)
Environment and fluid temp
-10~+60
Piston veocity
50~1000mm/s
Buffering
Air buffering
Stroke tolerance
~0~250+10 , 251~1000+14 , 1001~1500+18
Rc(PT)Joint size
G1/8"
G1/4"
G3/8"
G1/2"
Product Description
SC Series Pneumatic Cylinder
Product characteristics
Thin light
Under keeping operation precision and service life, its total
Lengthis 1/2-1/3 of general cylinder it presents thin and light
Characteristics.
Easy to install
Flush mounting is used, it needn't any parts, so that the space can be saved.
Easy to maintain
Because of simple assembling, it is convenient to assemble,disassemble and maintain.
Magnetic switch
There is space for assembling slot outside the body, so the
Magnetic switch is installed and adjusted easily
Why US
1: Various style for completely series pneumatic products for you to choose
2: High quality with competitive price
3: Sample order & small quantity order is ok
4: Provide free products information.
5. Reliable quality assured and active after-sell service
Payment and Shipment
Payment:Â T/T, Western Union, LC,Â
Shipment:Â Usually we send the goods by DHL, FedEx, UPS, TNT, or EMS or as your request;
                   After delivery, we will send you the tracking number by E-mail.
                   If you do not receive it within 7 business days after shipping, please contact us.
Note:2: We do our best to ship your order in 4Â weeks after receive your payment.
Other Products
  Our company also can provide other pneumatic cylinders as below,
1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISOÂ 6432)
2.Standard cylinder:SC/SU,MB,CA1Â Â
3.Mini cylinder:MA,MAL,CJ2,CM2,CJP Needle cylinder
4.Double-shaft cylinder:TN,CXS
5.Free installation cylinder:CU
6.Slide bearing cylinder:STM
7.Three-shaft cylinder:MGP
8.Stopper cylinder:RSQ
9.ADVU, SDA,CQ2B compact cylinder
10.Rotary cylinder:MSQ
11.Rodless cylinder:CY1
12.Air gripper:MHC Series Pneumatic Parrallel Gripper, MHC point type Gripper
      Parallel Style Wide Opening Air Gripper
For more details, plz feel free to ask,we will assist you to make the right things for your market!
Â
Model NO.: Sc63*200
Double-Acting Cylinder Type: Double Rod Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Pressurized Cylinder
Trademark: FITO
Transport Package: Carton
Specification: 80*80*357
Origin: China
HS Code: 8412310090
Model NO.: Sc63*200
Double-Acting Cylinder Type: Double Rod Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Pressurized Cylinder
Trademark: FITO
Transport Package: Carton
Specification: 80*80*357
Origin: China
HS Code: 8412310090
Specifications: