There are many times customers have such a doubt: After using CNC plasma cutting machine processing plates, whether in the vertical section or the surface finish of the parts, compared with the CNC flame cutting machine there is a certain gap, which makes many users right The quality of plasma cutting raised doubts. In fact, if we analyze it carefully, it is not difficult to see why. Derailleur gears are a variable-ratio transmission system commonly used on bicycles, consisting of a chain, multiple sprockets of different sizes, and a mechanism to move the chain from one sprocket to another. Although referred to as gears in the bike world, these bicycle gears are technically sprockets since they drive or are driven by a chain, and are not driven by one another. Bicycle Rear Derailleur,Bicycle Front Derailleur,Electric Bicycle Derailleur,Mountain Bike Derailleur Hangzhou Datasports Equipment Co.,Ltd(Oembicycle) , https://www.oembicycle.com
The cutting material of the flame cutting machine is less than the material of the plasma cutting machine. CNC flame cutting machine in cutting carbon plate, low alloy plate and other materials, the external surface of the parts of the attached amount of debris than, and very corporate employees will hit the parts after cutting to make the residue fall, thereby further improving the cross-section finish. Therefore, we will find that the cutting surface finish of the CNC plasma cutting machine is obviously inferior to the flame cutting machine. So, what factors in the production process will cause the cut surface finish to decrease? Sort out four reasons:
First, the cutting speed is abnormal.
Cutting speed is too fast or too slow will affect the smoothness of the cutting surface. Therefore, we must determine the cutting speed according to the material of the cutting plate. Don't be arbitrarily.
Second, abnormal gas flow We all know that the CNC plasma cutting machine blows off dregs through gas when cutting. If the gas flow rate is too small, the blowing force will easily produce dregs. Therefore, choosing the right gas flow plays an important role in ensuring the smoothness of the cutting surface.
Third, the anomaly of concentricity between the tungsten electrode and the nozzle During the cutting process, if the centering of the tungsten electrode and the nozzle is not good, the symmetry of the gas and the arc will be destroyed and the plasma arc will not be well compressed or arc generated. Blowing, cutting ability decreased. Therefore, the degree of concentricity between the tungsten electrode and the nozzle must be adjusted before cutting.
Fourth, plasma arc power anomalies In the above, we mentioned that if the centering of the tungsten electrode and the nozzle is not good, the symmetry of the gas and arc will be destroyed, and such cutting will also have obvious slag. Therefore, we can appropriately increase the power of the arc column, making it possible to use more air flow to enhance the air blowing force, which is very beneficial to eliminate incision hemangiomas.
Sometimes when we look at the problem, we can't just look at the surface. To analyze it in depth, we can find where the “root cause†is. When there is a big difference between our plasma cutting surface roughness and flame cutting, we can examine the reasons from the above four aspects.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting EQUIPMENT, a variety of cutting machine models, let the optional! Official website: /
Modern front and rear derailleurs typically consist of a moveable chain-guide that is operated remotely by a Bowden cable attached to a shifter mounted on the down tube, handlebar stem, or handlebar. When a rider operates the lever while pedalling, the change in cable tension moves the chain-guide from side to side, "derailing" the chain onto different sprockets.